Photovoltaic Module Test

The Z200 PV Analyzer may be applied for individual PV module tests and measurements, even when the instrument is connected to the string terminals. The procedure is to first measure a baseline, and then subsequently shading the PV modules one by one, while impedance data is collected by the Z200.

How to test solar panel output and find faults

When the String Tester application is activated, the Z200 Analyzer will set up a series of measurements based on deriving the basic solar cell impedance, which gives the user a fast overview of the general health state of the PV module string under test.

Photovoltaic Disconnect Fault Locater

Photovoltaic disconnect finder The Z200 PV Analyzer is multi-function tester, that can also be used to measure the position of a disconnect in a string of solar PV modules.